Difference between revisions of "Proxy models"
From PhotoVoltaic Logger new generation
m (→Dashboard) |
m |
||
| Line 2: | Line 2: | ||
[[Category:Model]] | [[Category:Model]] | ||
All these models accept only '''one''' child. | All these models accept only '''one''' child. | ||
| + | |||
| + | === Averageline === | ||
| + | |||
| + | Show a static line at the average reading value of a channel in the selected time range. | ||
| + | |||
| + | In cahhel settings you have to define the calculation mode, arithmetic or harmonic mean. ([[Averageline example]]) | ||
=== Baseline === | === Baseline === | ||
Latest revision as of 12:58, 2 July 2014
All these models accept only one child.
Averageline
Show a static line at the average reading value of a channel in the selected time range.
In cahhel settings you have to define the calculation mode, arithmetic or harmonic mean. (Averageline example)
Baseline
Show a static line at the minimum reading value of a channel in the selected time range.
Calculator
This model multiplies only the data from its only child with its factor.
To invert a channel, pass it through a Calculator with factor of -1.
Dashboard
To display data in dashboards, channels based on this model are required.
This model have some specials, as you can see here.
History
MeterToSensor
It accept only meter channels!
SensorToMeter
It accept only sensor channels (without meter attribute set)!
Topline
Show a static line at the maximum reading value of a channel in the selected time range.
