Difference between revisions of "SMA Webbox script"
From PhotoVoltaic Logger new generation
m |
m |
||
| Line 37: | Line 37: | ||
=== Inverter/Sensorbox GUID === | === Inverter/Sensorbox GUID === | ||
| − | ''required'', empty GUID skips section | + | ''required'', but an empty GUID skips section |
GUID_1 "" | GUID_1 "" | ||
Revision as of 08:42, 9 September 2014
With this script you can acquire data from your SMA Webbox and store them in PVLng.
This script can run via cron around the clock, the Webbox will be queried only during daylight times ±60 minutes.
Location
SMA/webbox.sh
Configuration example
SMA/webbox.conf.dist
Global settings
Webbox IP[:Port]
optional, default "192.168.0.168:80"
WEBBOX "192.168.0.168:80"
Installer password
The plain Webbox "installer" account password. If not set, the "user" account will be used for Webbox access, with less information.
optional
PASSWORD ""
Count of inverters / Sensorboxes
Count of following sections.
required
GUID_N 0
Section to copy
Copy the following settings as much as you need. Name the parameters for each section with the same _<#>
Inverter/Sensorbox GUID
required, but an empty GUID skips section
GUID_1 ""
Inverter/sensor box serial
The inverter/sensor box serial is requested by default via API. If you run the scripts on remote equipment, you should define them also here, so when the connection to your PVLng server fails, the data will be collected correctly.
optional
SERIAL_1 ""
