Difference between revisions of "SMA Webbox script"
From PhotoVoltaic Logger new generation
(Created page with "Category:Scripts == Location == SMA/webbox.sh == Configuration example == SMA/webbox.conf.dist == Settings == === Webbox IP[:Port] === ''optional'', default "192.168...") |
(No difference)
|
Revision as of 08:37, 9 September 2014
Contents
Location
SMA/webbox.sh
Configuration example
SMA/webbox.conf.dist
Settings
Webbox IP[:Port]
optional, default "192.168.0.168:80"
WEBBOX "192.168.0.168:80"
Installer password
The plain Webbox "installer" account password. If not set, the "user" account will be used for Webbox access, with less information.
optional
PASSWORD ""
Count of inverters / Sensorboxes
Count of following sections.
required
GUID_N 0
Section to copy
Copy the following settings as much as you need. Name the parameters for each section with the same _<#>
Inverter/Sensorbox GUID
required, empty GUID skips section
GUID_1 ""
Inverter/sensor box serial
The inverter/sensor box serial is requested by default via API. If you run the scripts on remote equipment, you should define them also here, so when the connection to your PVLng server fails, the data will be collected correctly.
optional
SERIAL_1 ""
