1-Wire Hub v2
From PhotoVoltaic Logger new generation
Here comes the Version 2 of my 1-Wire Hub.
The basics are the same as in Version 1, see there for wiring concept.
For this one I use a case for a cap rail like the following with 12 connectors on each side.
Therefor the layout was adjusted like this:
Furthermore I use a USB to 1-Wire adapter like this.
(It is from DAEStore from Bulgaria on eBay which make good parts for 1-Wire networks)
Here are some pictures to get an impression.
Conductor plate top with correct size and connectors
Conductor plate bottom view with path breaks (made with a 6mm drill)
Wiring
Mount plate for USB adapter
Mounted USB adapter
Mounted in cubicle with 2 sensors connected.
(All not used D+ & D- are bridged here!)
Finished :-)
