View source for Quick start

To get a 1st impression of the system, 2 fake channels are installed by default.

They deliver random data on each request.

To get a feeling with charts, you can use them to play around with the presentation settings.

== RANDOM Temperature sensor ==

This sensor simulates a temperature sensor in °C with a valid range of 15 ... 25 °C.

Each "next" reading differs max. ± 0.5 °C from last one.

[[File:RandomSensor1.png]]


[[File:RandomSensor2.png]]

== RANDOM Energy meter ==

This sensor simulates a energy meter with kilo watt hours readings, starting by 0 with (nearly :-) open end.

Each "next" reading differs max. + 0.2 kilo watt hour from last one.

[[File:RandomMeter1.png]]

The consumption cost 0.20 per kilo watt hour, because of the unit watt hours is it set to 0.0002

''Please note'': The readings here are in kilo watt hours, to get watt hours out, the resolution is set to 1000.

[[File:RandomMeter2.png]]

== Chart ==

Simple chart with these 2 channels, but with
* Show temperature in blue, except above 20°C in red

[[File:RandomChart.png]]

[[Category:Example]]