1-Wire Hub v2

Here comes the Version 2 of my 1-Wire Hub.

The basics are the same as in Version 1, see there for wiring concept.

For this one I use a case for a cap rail like the following with 12 connectors on each side.

Therefore the layout was adjusted like this:

(View from top, printed circuits and soldering on the bottom)

The cyan, red and black thick dots are the soldering points for the upstream Data, +5V and GND wires.

Furthermore I use a USB to 1-Wire adapter like this.

It is from Denkovi Assembly Electronics ltd. from Bulgaria (Store on eBay) which make good parts for 1-Wire networks which are worth the money. (User manual)

Some more pictures...

• 

  Conductor plate top with correct size and connectors

• 

  Conductor plate bottom view with path breaks (made with a 6mm drill)

• 

  Wiring

• 

  Mount plate for USB adapter

• 

  Mounted USB adapter

• 

  Mounted in cubicle with 2 sensors connected.
  (All not used D+ & D- are bridged here!)

• 

  Finished :-)