Difference between revisions of "1-Wire Hub v2"
From PhotoVoltaic Logger new generation
m |
m |
||
| Line 7: | Line 7: | ||
| − | [[File:1WireHub2Gehaeuse.jpg| | + | [[File:1WireHub2Gehaeuse.jpg|400px]] |
| Line 21: | Line 21: | ||
| − | [[File:1WireHub2Adapter.jpg| | + | [[File:1WireHub2Adapter.jpg|400px]] |
(It is from [http://www.denkovi.com/ Denkovi Assembly Electronics ltd.] from Bulgaria ([http://stores.ebay.com/DAEStore/_i.html?_nkw=1-Wire&submit=Search Store on eBay]) which make good parts for 1-Wire networks which are worth the money. | (It is from [http://www.denkovi.com/ Denkovi Assembly Electronics ltd.] from Bulgaria ([http://stores.ebay.com/DAEStore/_i.html?_nkw=1-Wire&submit=Search Store on eBay]) which make good parts for 1-Wire networks which are worth the money. | ||
| − | Some more pictures | + | |
| + | Some more pictures... | ||
<gallery> | <gallery> | ||
Revision as of 14:41, 1 September 2014
Here comes the Version 2 of my 1-Wire Hub.
The basics are the same as in Version 1, see there for wiring concept.
For this one I use a case for a cap rail like the following with 12 connectors on each side.
Therefore the layout was adjusted like this:
(View from top, printed circuits and soldering on the bottom)
The cyan, red and black thick dots are the soldering points for the upstream Data, +5V and GND wires.
Furthermore I use a USB to 1-Wire adapter like this.
(It is from Denkovi Assembly Electronics ltd. from Bulgaria (Store on eBay) which make good parts for 1-Wire networks which are worth the money.
Some more pictures...
Conductor plate top with correct size and connectors
Conductor plate bottom view with path breaks (made with a 6mm drill)
Wiring
Mount plate for USB adapter
Mounted USB adapter
Mounted in cubicle with 2 sensors connected.
(All not used D+ & D- are bridged here!)
Finished :-)
