Dashboard module
From PhotoVoltaic Logger new generation
Contents
Menu
If you have defined dashboards, you can acess them by hover the "Dashboard" menu item.
Preparation
Define your dashboard using Dashboard channels, you can select then only these channels!!
Channel Hierarchy
Dashboards channels selection
Specialized dashboard channels have some additional features:
- Definition of axis start and end values, no auto detection
- Definable color bands on the axis
Channel definition
Define to color bands for the gauges like this.
start > end : color
- Spaces around delimiters are optional
- For start and end absolute or relative (with % suffix) values allowed, also mixed
- If start is not given, begins from axis starts
- If end is not given, ends on axis end
- Colors can be defined as HTML color names (green, red etc.) or HTML color codes (#123456)
E.g. for a temperature channel (with axis range -30°C ... 30°C) the following are equivalent:
> 0 : blue == -30 > 50% : #0000FF 0 > 20 : green == 50% > 20 : #008000 20 > : red == 20 > 100% : #FF0000
Example
Axis range: -15°C ... 55°C
> 0 : #BBF // below zero 0 > 35 : #BFB // ok 0 ... 35°C 35 > 40 : #FFB // warning 35°C ... 40°C 40 > : #FBB // critical above 40°C
Multiple Dashboards
You can have an unlimited number of dashboards.
- Mark the relevant channels
- Sort their order by dragging them around
- Give it a name and
- Save it as new dashboard or change just loaded dashboard
Advanced usage
You can embed the dashboard also anywhere else, for example via iframe.
For this view, no authorization is required!
To get the embedded view, just use
http://your.domain.here/dashboard/embed/<dashboard slug>
You can find this link on this bookmark button: 
You can this also use to run PVLng on an info frame, just open this in full screen!
